Compressor/Tone Support Series:

Uni-Comp Bias-Control Compressor
One the best Compressors on the Market !

Uni -Comp Compressor features an ultra fast response to signal, by accenting any weak signals and attenuates loud ones to make chords come alive and really pop. I have had compressors that seem to simply compress by "dropping the volume" and along goes the tone as well.

Not so here...on it's own it will really round out, elevate and accent the overall sound. Sustained notes, power chords are very attainable and balanced. Place this in- line before a favorite Distortion or Drive pedal and the Uni-Comp will push it even harder, smoother and more powerful.

There is also very little background noise here on the Uni-Comp where some units push the signal too much (and push the noise).

A great feature on the Uni-Comp is the Bias (EQ) Knob where you can balance the frequency response from Low to High..... you can even use it with a Bass Guitar!

Features at Glance:
  • Ultra fast response to signal
  • Twin Filter avoids low-freq modulation
  • Extremely Low Noise
  • Flexible EQ Bias Knob
*************************************************************************************************************

This is the amazing BUFFALO!

Booster effect/Amp Simulator, Direct out Box, Parametric EQ function, Headphone Amp. Great for Live or recording use!
BUFFALO Gen 3 specs:

The BUFFALO features a huge variety of control to shape the sound as well as other features simply not found in one stomp box.

First, it's a direct to amp overdrive effect that sounds good straight to amp and has plenty of headroom and adjustment. It has Low, Mid and High EQ along with a Frequency knob for EQ contour adjustments shifting of these frequencies. New for the Gen2, the stomp switch will allow bypass to the equalizer section for more song shift dynamics. Volume knob for total output level and an Attenuation knob which is for input signal attenuation/boost. I prefer this over some of my other drive pedals, colors the sound nicely with just enough 'edge" to the sound.

Second, it's a headphone amp !! Perfect for late night jams or when an amp is not available. The unit is self powered to receive a headphone connection ( small pin headphone in). Sounds somewhat like the Rock It headphone amp when going through the Buffalo direct. Hook some effects in line, Delay, Reverb, Chorus, ect., it really starts to come alive. More than enough to inspire some new riffs with late night jams through headphones. Great for travel or carry-on.......

Third, it's a direct box !! DI balanced output for going straight to a board or mixer or... unbalanced direct out for other 1/4 jack uses. This accepts three prong mic/instrument cable.
Any three options can be useful as a stand alone item, but with the BUFFALO, it's all here in one.

This version 3 features a ground switch....
One very cool little box........ !

Stomp Switch - Engage or bypass parametric EQ circuit which affects to all outputs.
"To Amp" Jack - output without speaker simulator.
"BAL" Jack - Balanced XLR output with speaker simulator.
"UNBAL" Jack - Unbalanced output with speaker simulator.
"Phones" Jack - Headphone output with speaker simulator.

************************************************************************************************************

This is the new AB BAR

Guitar Signal Path Switching System
Get your effects "under control"

MOEN AB BAR PEDAL SWITCHER.

AB BAR is a true bypass switcher which could simply toggle between two effect loops, with additional loop-send-buffers but being true bypass throughout, you have the ability to connect vintage fuzz or wah pedals into the chain without having to separate from the chain or signal path. The very tiny footprint makes it possible to fit any type of pedal board. A great addition to any pedal board and you might wonder how you did without it!

Layout Example 1
In this configuration, engage TUNER/CLEAN switch (led on) will switch the guitar signal to a tuner, at the same time the LOUT is muted. LOOPA/LOOPB switch choose effects chain A or chain B.
Layout Example 2
In this configuration, use AB BAR to choose 3 different guitars as input,

Path1 - Acoustic Guitar -> Input-> Clean out-> Acoustic Guitar Amp
( “BYPASS” on, “CLEAN” on)

Path2 - E Guitar A -> Return A-> LOUT->Electrical Guitar Amp
( “BYPASS” off, “CLEAN” off, “LOOPA” on )

Path3 - E Guitar B -> Return B-> LOUT->Electrical Guitar Amp
( “BYPASS” off, “CLEAN” off, “LOOPB” on )
Specifications:
Dimensions............................................................7.88(L) x1.42(W)X1.30(H) inch Weight.................................................................................................200g Power Supply..............................................................................DC9V to 12V Current Drain.................................................................................max. 10mA Stomp Switches...............................................................3PDT true bypass type Switch Distance (Center to Center).........................................................2.8 inch 

Contact Us Today!


4909 Highlands Dr

McKinney, 75070


Phone: +1 972 5295510 +1 972 5295510

E-mail: earthcitysound@fastmail.fm

Special Facebook Promotion

Like us on Facebook and get 10% off your next order.

Print Print | Sitemap
Moen Guitar Technology 2014 all rights reserved